• WEED SPINNER

    Got weeds? Let your drill do the work.

    Weed Spinner is an innovative drill-driven weed removal tool that spins out weeds at the root.

    It's fast and fun to use. There's no kneeling, bending, or getting your hands dirty!

    What is it, exactly?

    • Use Weed Spinner with your cordless electric drill (drill not included)
    • 33-inch-long forged steel shaft
    • The end that goes into your drill features three flat surfaces to stay firmly in the drill's chuck
    • Innovative design features a forged pointed tip to pierce sod, hardscape, and clay soils
    • Works on most any surface where weeds grow (lawns, gardens, sod, hardscape, loose rock, and more)
    • Easy on your back and knees
    • Eco-friendly and chemical-free
    • Aerates and tills
    • Invented and patented by Vern Ader, a retired teacher and gardener

    How does it work?

    • Insert the Weed Spinner shaft into the chuck of your drill.
    • Point the tip into the ground next to the weed's main center stalk, then pull the drill's trigger for a few seconds and push down slightly. A slight angle works best.
    • For safety and a better result, don’t start the drill until the Weed Spinner is properly placed.
    • Your Weed Spinner will usually pull the roots out along with the weed.
    • If your Weed Spinner hits a large rock or large root, it’s possible for the drill to jerk suddenly. If this is a concern, use a drill that has a second side handle for stability.
    • Weeds may become wrapped around the Weed Spinner. If they don't fall off on their own when the drill is raised up, put the drill in reverse and spin for a few seconds to unwind the weeds. With the drill off, they can be removed by hand.
    • The Weed Spinner isn’t recommended for caliche, calcrete, hardpan, or duricrust sedimentary soils. Heavy clay soils may bog the drill.

    Item: 9753
  • HOMESTEAD IRON TOOL CARE WAX

    This tool care wax is an amazing rust preventative. The folks at Homestead Iron use it as a finish on each and every one of their tools. The ingredients are beeswax and linseed oil. Simple enough, yet sustainable.

    It's easy to apply, too! Just rub the bar of wax all over your freshly cleaned tool and its handle, then buff off with an old cloth.

    Item: 8609
  • 60" LONG HANDLE WEEDER & CULTIVATOR

    Give the long handle a try or give it as a gift to an older gardener. We guarantee they will be happy. The sharp blade cuts through hard soil. The unique blade shape and angle make it an extremely effective weeding device The single blade cuts hard soil more easily and with far less resistance than a wide hoe or a multi-tined tool. Excellent for weeding in tightly spaced crops such as onions, where most hoes are too wide to be safely effective. Extremely effective tool for scalping or cutting off weeds at ground level. Work around drip irrigation or other tight spaces. Made in USA! One year unconditional warranty. The CobraHead® Long Handle weighs about 2.4 pounds and comes in three (3) handle lengths of 48", 54" and 60" (inches). The blade assembly adds 8" to the length, so the overall tool lengths are 56" (48" handle), 62" (54" handle), and 68" (60" handle). Gardeners over 6' 2" may prefer the 60" handle. Please note: handle length choices are subjective to individual users.

    Item: 6554
  • 9 INCH BIODEGRADABLE PLANT MARKER - WHITE

    Feel great about your garden and reduce your carbon footprint with these biodegradable plant markers. Made to last in every kind of weather, these plant markers will be marking your garden plants for years to come! Because they are made with 80 percent biodegradable polyesters and 20 percent biomass, after years of use, you can throw them into your compost!

    Item: 9085
  • 9-INCH PLANT MARKER

    Great for the eco-conscious home gardener with a small- or large-scale garden, these 9-inch plant markers are made with 80 percent recycled plastic and 20 percent biomass from agriculture waste byproducts. The markers achieve a lower carbon footprint by using post-consumer or post-industrial recycled plastic. Made to last in every kind of weather, these plant markers will be marking your garden plants for years to come!

    Item: 9170
  • COBRAHEAD "MINI" WEEDER & CULTIVATOR

    An exceptional solution for weeding grass, the Mini gets in the slightest of areas with surprising precision, and it's perfect for lifting out smaller taprooted weeds intact. The sharp, narrow blade rips up tough soil, and the Mini’s small size makes it perfect for container gardening. Because it easily fits in your pocket, you can always have it with you when you are in the yard or garden. Built as tough as the original CobraHead, the Mini features a fully tempered forged steel blade and a nearly unbreakable composite plastic handle that is comfortable in almost any hand. Built to last, CobraHead tools can be counted on for years of service.

    The combination of the specialized blade and the comfortable, ergonomic handle let you reach every weed in your garden without worrying about damaging your flowers. Whether you need to get in between rows of vegetables or cracks in your walkway, the Mini will get the job done. Please allow two weeks for delivery.

    Item: 8954
  • COBRAHEAD 12" SHORT HANDLE WEEDER & CULTIVATOR

    Make your gardening easier with the CobraHead® Weeder and Cultivator. Its blade is a steel fingernail® that becomes an extension of your hand. It weeds, cultivates, scalps, edges, digs, furrows, plants, transplants, de-thatches, and harvests with ease. The CobraHead out-weeds and out-digs all similar tools. The time proven blade design breaks up and plows almost any soil. The comfortable and efficient handle allows easy left-hand or right-hand action. Made in Wisconsin, USA!

    Item: 6551
  • COBRAHEAD 54" LONG HANDLE WEEDER & CULTIVATOR

    The Cobrahead® Long Handle Weeder & Cultivator is a true improvement to similar hoes already out there. Give the long handle a try or give it as a gift to an older gardener. We guarantee they will be happy. The sharp blade cuts through hard soil. The unique blade shape and angle make it an extremely effective weeding device The single blade cuts hard soil more easily and with far less resistance than a wide hoe or a multi-tined tool. Excellent for weeding in tightly spaced crops such as onions, where most hoes are too wide to be safely effective. Extremely effective tool for scalping or cutting off weeds at ground level. Work around drip irrigation or other tight spaces. Made in USA! One year unconditional warranty. The CobraHead® Long Handle weighs about 2.4 pounds and comes in three (3) handle lengths of 48", 54" and 60" (inches). The blade assembly adds 8" to the length, so the overall tool lengths are 56" (48" handle), 62" (54" handle), and 68" (60" handle). The 54" handle (62" overall) is typical and recommended for most gardeners.

    Item: 6553
  • HANG-A-POT

    With Hang-A-Pot, you can instantly transform any interior or exterior space into one of beauty and elegance. Hang-A-Pot easily mounts to a wide variety of surfaces to give you the beauty of perfectly displayed floral arrangements within minutes! From hanging garden pots to displaying beautiful orchids, Hang-A-Pot can do it all!

    The Hang-A-Pot clay pot hanger is beautifully engineered to catch the lip of the pot by gravity. The weight of the pot rests on the large angle of the flower pot hanger, thereby leveraging the weight against the surface to which it is attached. This means there is very little pressure on the screw. It will not pull out!

    Features:

    • Attaches in minutes to decks, fences, concrete, lattice, chain link, wrought iron, brick, stucco, stone, aluminum screen enclosures, vinyl fencing, etc.
    • Hangs any flower, orchid, or herb pot (clay, ceramic, terracotta, etc.) with a lip, four to 10 inches in diameter.
    • Securely supports heavy pots with a fully-potted plant (in a stress test, Hang-A-Pot supported over 100 pounds).
    • Made of durable polypropylene, the material of choice for extreme hot and cold weather conditions, to create a strong hanging flower pot holder.
    • UV-resistant.
    • Holds potted plants securely in high winds.
    • Hang-A-Pot flower pot hanger “disappears,” displaying only the beauty of the pot and flowers or herbs.

    As one of the strongest flower pot hangers, Hang-A-Pot will easily support the full weight of a potted plant, soil, and water. Even heavy succulents and vegetables are no match for Hang-A-Pot. Combined with gravity, the big angle acts a lever, transferring the plant’s weight to the pot’s surface.

    Whether you have small 4-inch flower pots to hang, or larger 10-inch pots, Hang-A-Pot is sure to be the only flower pot hanger you need! In addition to being a great decorative accessory, this amazing clay pot hanger is perfect for starting your own vertical garden at a reasonable price.

    Item: 9678
  • HOEDAG CULTI-HOE

    Gardening will be easier than ever this season with the Hoedag Culti-Hoe. Not only is it great for weeding, planting, tilling, and digging, it’s perfect for cultivating and aerating as well. Each Hoedag Culti-Hoe tool is handcrafted with a blade that is heat-treated for exceptional strength and toughness, with a handle made from seasoned hardwood.

    Item: 9352
  • HOEDAG GARDENING TOOL

    The Hoedag Gardening Tool is the perfect garden tool for weeding, digging, and slicing through roots! Lightweight and super sharp, the Hoedag is the ideal multi-use hand-held garden hoe.

    Item: 9351
  • HOMESTEAD IRON 3-TINE CULTIVATOR HAND FORGED

    The 3-Tine Cultivator is perfect for either light and loose soil or clay and rock. It’s ready to take your abuse! Hand-forged to finish, the tool will help you amend your soil. It’s great for tidying up your beds for fall or amending your soil for springtime planting.

    The cultivator is handmade in the United States!

    Item: 8963
  • HOMESTEAD IRON BATWING HOE

    This unique blade, we call batwing was traditionally a cotton hoe. Used for working in the fields between rows and around plants. It's easy to see why. This tool is one of the most versatile tools we offer.

    You can use it for delicate scalp weeding, hacking and chopping, or turn it on either point for dragging seed furrows or chopping out sod. The extra long shank allows for better extension in larger raised beds.

    Batwing Hoe Specs: Weight- 14.8 oz., Tool Length- 18", Blade Width- 5", Blade Length- 2"

    Item: 8606
  • HOMESTEAD IRON CROWS FOOT CULTIVATOR

    The Homestead Iron Crows Foot Cultivator is great for working in finer amended soil, cultivating the dirt around plants easily. The tool is forged by hand, heated and beat into shape – just like in the old days. Each tool comes with a lifetime guarantee. Give it proper care and maintenance, and should it bend or break, Homestead Iron will repair or replace your tool.

    Item: 8600
  • HOMESTEAD IRON DUTCH WEEDER, LEFT HANDED

    This beauty is a reproduction of the same tool that came into existence 1,200 years ago. Japan and Holland thought up this design independent of one another during the same time period! Made with a thin, flexible blade, this is the perfect implement for fine weeding up close to your plants. A scraper and slicer, it’s made to get baby weeds as they come up (before they get stringy or woody). All Homestead Iron tools are sharp! They use 1075 high-carbon steel for their blades and treat each as a high-quality knife. Each tool comes with a lifetime guarantee. Give it proper care and maintenance, and should it bend or break, Homestead Iron will repair or replace it.

    Item: 8602
  • HOMESTEAD IRON DUTCH WEEDER, RIGHT HANDED

    This beauty is a reproduction of the same tool that came into existence 1,200 years ago. Japan and Holland thought up this design independent of one another during the same time period! Made with a thin, flexible blade, this is the perfect implement for fine weeding up close to your plants. A scraper and slicer, it’s made to get baby weeds as they come up (before they get stringy or woody). All Homestead Iron tools are sharp! They use 1075 high-carbon steel for their blades and treat each as a high-quality knife. Each tool comes with a lifetime guarantee. Give it proper care and maintenance, and should it bend or break, Homestead Iron will repair or replace it.

    Item: 8601
  • HOMESTEAD IRON GRUB HOE

    The hand-forged Grub Hoe is a great all-around tool: It digs and slices through your toughest chores with ease. The heat-treated 1075 spring steel blade is sharp and durable, making it great for chopping and weeding. The tool’s tines, meanwhile, dig hard ground and effortlessly cut out tough roots. Precision TIG-welded on a forged diamond shank and finished with a solid hickory handle, this tool provides a lifetime of service.

    Item: 8608
  • HOMESTEAD IRON MULTI-PURPOSE TROWEL

    This little guy does it all! The sharp chisel tip works to pop out stubborn weeds. The forged ridges in the blade act as a depth gauge and meter out fine seeds: Just shake and trickle out a few at a time. If that's not enough, the tool does everything a trowel does, too! It’s a must-have for the gardener who has everything (or the minimalist who needs a single, versatile tool). Each of Homestead Iron’s garden tools comes with a lifetime guarantee. If you give it proper care, and your tool bends or breaks for any reason, the company will repair or replace it.

    Item: 8607

Recommendations For You

Recently Viewed